Tektronix Applications Expert

Hello,

There are a couple options here. Most people bought the TPS2000 series scopes because of the isolated input channels. If those are an important requirement for you then I would suggest you just get the TPS2012B which we do still offer. It is only 2 channels and 100MHz, but it is the only scope we currently offer with isolated input channels. If you are just looking for another 4 channel 200 MHz scope then there are other newer and cheaper options. I would suggest that you look at both the TBS2204B (https://www.tek.com/en/products/oscilloscopes/tbs2000) and the 3 Series MDO (https://www.tek.com/en/products/oscilloscopes/3-series-mdo). Both could likely be used with high voltage differential probes to hopefully measure what you previously used the isolated channels for.

Hello,
Sorry we do not make or have instrument carts any more.

We have a standard rack mount to mount the scope in a 19in RACK. (we do not have racks)
https://www.tek.com/en/manual/rmb2040-075109900

Hello,
From manual on tek.com I assume the parts you need are below.
https://www.tek.com/en/manual/model-2000-benchkit-users-guide-pa-866-rev-manual

428-338B - Mounting Ear left
428-328E - Mounting Ear right
FE-22A - Foot
428-329F - Handle

To order a part call 1-800-833-9200 opt 1.
Or send an email to buy@tektronix.com

Hello,

The part number is 366-0877-00.

To order a part call 1-800-833-9200 opt 1.
Or send an email to buy@tektronix.com

On the A622 we provide functional Verification. We do not calibrate.

You can find the specifications in the user manual:

https://www.tek.com/en/manual/current-probe/a622-100-amp-acdc-current-probe-instructions-current-probes

Hello,

The EECN for the MSO58LP is 3A992. You can use our Export Classification tool to find this number, along with other export information: https://www.tek.com/en/support/export-codes.

Hello,

Both scopes have a DC gain accuracy of 1.5% above 5mV/Div (derated at 0.100%/°C above 30 °C). You can find the exact specification for both scopes in their respective datasheet

MDO3000 see page 6:
https://www.tek.com/en/oscilloscope/mdo3000-mixed-domain-oscilloscope-manual/mdo3000-series-4

MSO4000B see page 3:
https://www.tek.com/en/oscilloscope/mso4000-dpo4000-manual/mso4000b-and-dpo4000b-series-0

Hi,

I don’t personally have much experience scripting with Matlab, but we do offer some sample/example/demo scripts on the Tektronix forums and Github pages. I would suggest referencing these or even building your code from these examples. The ‘simple plot’ script and demo video discuss how to collect data from the scope and then plot that data, similar to what you are requesting.

Tek Forum Programming Examples: https://forum.tek.com/viewtopic.php?f=580&t=133570
• MATLAB ICT: MDO Simple Plot: https://forum.tek.com/viewtopic.php?f=580&t=141809
• Simple Plot Demo Video (python): https://www.youtube.com/watch?v=W5Brxiwnp5g

Tektronix Github: https://github.com/tektronix/Programmatic-Control-Examples

Test Automation and Python Programming Lecture: https://www.tek.com/de/video/webinar/test-automation-and-python-programming

Hello,

Using the following commands you can set or query the callout text position.
CALLOUTS:CALLOUT:DISPLAYPOSition:X
CALLOUTS:CALLOUT:DISPLAYPOSition:Y
More information about these commands can be found on page 2-383 (PDF 405) of the programmers manual.

https://www.tek.com/en/manual/oscilloscope/4-5-6-series-mixed-signal-oscilloscope-programmer-manual-5-series-mso

Hello,

Please ensure that the USB stick is formatted as the FAT32 file system.