Tektronix Applications Expert

Hello David,

All replacement parts for the PS281 have long been supply depleted. I'm not aware of any source.

Hello, the correct license to purchase is: KICKSTARTFL-SUITE-UP

Hello, please be sure you are running at least version 1.7 of the firmware on your 2461 as there was a fix for this issue that was resolved in this version.

Hi,
Here is a link to a video on tek.com for the I-V curve tracer software install
https://www.tek.com/how-to/i-v-tracer-install

1. Do not need any kickstart license to use only I-V Tracer.
2. Install in Kickstart with Kickstart host ID first then install in the unit.

Hello,

This issue can happen if there is not a probe tip attached or if the tip did not get seated properly. The probe tip determines the mode selected by the probe. If you do have a probe tip attached, try removing and then reseating it.

The TMDP0200 has the TekVPI probe interface and is compatible with MSO4

Hello,

You can use our OpenChoice Desktop software to Open a .isf file and then save it as a .csv file. Here is the latest version of this software: https://www.tek.com/en/support/software/utility/tektronix-openchoice-desktop-application-tdspcs1--v28. Let me know if you have any additional questions about this software.

Hello,

Unfortunately we no longer carry the instrumentation cart for the 4200A.

In our product line applications group and in engineering, we use Uline kitchen carts. A link to this cart is pasted below.

https://www.uline.com/BL_2495/Solid-Top-Stainless-Steel-Wire-Carts?keywords=kitchen+cart

Hello,

You can create a frequency modulated signal using an external source. For detailed setup information see page 53 (PDF 71) of the user manual.

AFG2021 User Manual:
https://www.tek.com/en/signal-generator/afg2000-function-generator-manual/afg2021-1

Thanks for contacting us,

The THDP0200 uses a TekVPI interface and won't work with the standard BNC connectors of the TPS2014B. For a high voltage diff. probe that does connect with a BNC interface I'd recommend looking at our P5200A probe, although it has slightly lower max voltage ratings and only has a 50MHz bandwidth.