Marc Royer

Where can I find the CAD model for the MSO58LP?

The differences and similarities between the MSO5 and MSO5B can be found here:
https://www.tek.com/en/documents/fact-sheet/5-series-b-mso-vs-5-series-mso-comparison

What are the differences between the MSO5 and MSO5B?

I've confirmed that the firmware file in the SeriesMDO_V1_15_18_066201207.zip file is named incorrectly and is indeed titled "firmware.img" We've validated that this firmware image file, although incorrectly named, is the correct .img file. You can feel free to use this file per the installation instructions and so long as this is the only .img file in the folder, it will be loaded onto the scope. Alternatively, we are working to get the zip file contents to match the installation instructions.  If you prefer to wait until that is resolved, that would work as well.

I bought the MDO34. I followed instructions to download the latest the firmware (V1.15.18), but the img file that holds the firmware is not included in the zip-file. Instead, there is a firmware.img file that the instructions explicitly tell you not to use. Could you please fix? 

Check out the following which showcases the MSO5B, IMDA (Inverter Motor Drive Analysis) software package and probe recommendations:
https://www.tek.com/en/documents/primer/making-measurements-on-3-phase-motor-drives-with-an-oscilloscope

-Marc

I'm trying to find an oscilloscope that can handle We need a 4 channel for testing three phase motors 480 volts AC. The inputs have to be able to handle 600VACim trying to find an oscilloscope that can handle We need a 4 channel for testing three phase motors 480 volts AC. The inputs have to be able to handle 600VAC.